Gedotec

Manufacturer A-Z

Show all

Products of Gedotec

Gedotec steel furniture foot, height-adjustable, stainless steel look, M10 thread, 85 mm

Version: 85 mm

Gedotec Adjustable Furniture Foot in Stainless Steel Optics Product Details Gedotec brand quality modern design furniture foot round cabinet foot with height adjustment + 20 mm high-quality and solid brand product ideal for the entire living area Application: furniture, beds, cabinets, boxes, kitchen, etc. Mounting: screw-on with M10 thread Mounting plate Ø: 60 mm Foot tube Ø: 35 mm Height: please select Material: steel Surface: stainless steel optics Height: (please select above) 85 mm 100 mm 150 mm 200 mm Unit of measure: per 1 piece furniture foot Adjustable stainless steel furniture feet by Gedotec They may be small, but they have to carry quite a bit of weight: furniture feet that raise, support, and/or level height differences in your furniture. Therefore, it is important to pay attention to quality. In the following, you will learn how to install these stainless steel furniture feet and the areas they are suitable for. What should you consider when choosing new cabinet feet? In order to easily reach under the furniture with a vacuum cleaner or mop, choose an adequate height, as too low cabinet feet make cleaning more difficult. This is particularly important for furniture that is not easily movable. Square or round - consider how the piece of furniture is designed. Short, square cabinet feet usually do not go well with vintage furniture, but they look good in a Hygge-style setting. By the way: if your floor - like in many old houses - is uneven, these height-adjustable stainless steel furniture feet can be particularly useful. With them, you can easily compensate for floor irregularities. This saves you from wobbly furniture, which can be really annoying and frustrating in the long run. Three good reasons for furniture feet Oftentimes, bulky cabinets and heavy furniture look airier, lighter, and more elegant with feet. They visually lose weight and are therefore particularly suitable for small spaces. For couches and beds, furniture feet provide sufficient ventilation - ideal for stuffy rooms. If you have underfloor heating, the heat should not be directed into the furniture, but into the room. This is where furniture or cabinet feet provide a remedy. Product details about the stainless steel furniture feet by Gedotec These solid stainless steel furniture feet in a round, modern design are adjustable in height and perfect for the entire living area. Whether for beds, cabinets, boxes, or kitchen cabinets - they allow you to enhance your furniture wonderfully and give rooms a visual boost. Material & Finishes These round furniture feet are made of brushed stainless steel. The diameter of the mounting plate is Ø 60 mm. The foot tube has a diameter of Ø 35 mm. Screws with an M10 thread are included for installation. You can choose from the following heights: 85 mm 100 mm 150 mm 200 mm Scope of delivery Each delivery includes one adjustable furniture foot by Gedotec, including screws and an M10 thread. How to install the stainless steel furniture feet by Gedotec Empty the cabinet or furniture piece and remove any shelves if necessary. This will make it easier to lift the furniture piece. Carefully place the furniture piece with the backside down on a soft surface. Now, place each stainless steel furniture foot in the desired position and secure it with the included screws. You may need to drill new holes for this. To do this, place the mounting plate on the underside of the furniture piece and mark the holes with a pencil. Tip: Drill the holes slightly too small (i.e. too tight), rather than too big. If necessary, you can still enlarge them later on. Also, make sure that the supplied screws have the correct length. They should not be longer than the thickness of the board they are being screwed into. After all, they should not protrude inside the furniture piece. Afterwards, carefully lift the respective piece of furniture with two or more people. Caution: Do not use the furniture feet as a pivot point when lifting, as they can break. You may need to readjust the height of the cabinet foot. However, you can still make adjustments afterwards. Finished! Your cabinets and furniture are now safely standing on their new, sturdy stainless steel furniture feet.

€11.85*

Manufacturer Navigation

Manufacturer A-Z